specification 150 watts ? energy star level v 15 v ? cec 2008 & eisa2007 compliant ? worldwide medical approvals ? class i and class ii versions ? optional ac cable restraint ? optional output connectors ? low leakage current amm150 series input input voltage ? 90-264 vac input frequency ? 47-63 hz input current ? 2 a rms at 115 vac, 1 a rms at 230 vac earth leakage current ? 90 a max at 115 vac/60 hz, (class i versions) 150 a max at 230 vac/50 hz input protection ? internal 3 a fuse in live and neutral lines no load input power ? <0.5 w output output voltage ? see table initial set accuracy ? 2% minimum load ? no minimum load required start up delay ? 2 s max at 115 vac start up rise time ? <80 ms at 115 vac hold up time ? 15 ms at 110 vac line regulation ? 0.5% load regulation ? 5% transient response ? 4% deviation recovering to <1% within 300 s for 25% step change ripple & noise ? 2% pk-pk max, see note 1 overvoltage protection ? 112-140% of nominal output voltage, auto recovery overtemperature ? unit shuts down, auto recovery protection overload protection ? 130-180% auto recovery short circuit protection ? trip & restart (hiccup mode) temperature ? 0.04%/c coefficient xppower.com general efficiency ? 85% minimum (see note 4) isolation ? 4000 vac input to output 1500 vac input to ground 500 vac output to ground switching frequency ? 50-110 khz power density ? 2.9 w/inch 3 mtbf ? 150 khrs per mil-hdbk-217f environmental operating temperature ? 0 oc to +60 oc, derate linearly from 100% load at +40 c to 50% at +60 c cooling ? natural convection operating humidity ? 5-95% rh, non-condensing storage temperature ? -40 oc to +85 oc operating altitude ? 3000 m shock ? 30 g, 10 ms on 3 axes vibration ? 5-100 hz, 2.31 m/s 2 , 20 mins on 3 axes emc & safety emissions ? en55011, class b conducted en55011, class b radiated harmonic currents ? en61000-3-2, class a voltage flicker ? en61000-3-3 esd immunity ? en61000-4-2, 8 kv air & 6 kv indirect discharge, perf criteria a radiated immunity ? en61000-4-3, level 2 perf criteria a eft/burst ? en61000-4-4, level 3 perf criteria a surge ? en61000-4-5, level 3 perf criteria a conducted immunity ? en61000-4-6, 3 v rms perf criteria a magnetic field ? en61000-4-8, 1 a/m perf criteria a dips & interruptions ? en61000-4-11, >95% u t for 10 ms, 60% u t for 100 ms, 30% u t for 500 ms perf criteria a, b, b safety approvals ? en60601-1, ul60601-1, csa22.2 no. 601-1 per cul ac-dc
3.23 (82.0) 8.17 (207.6) cable length approx 48 (1219 mm) power on indicator 1.96 (49.7) rubber foot (4 places.) ac input 0.02 (0.5) 1 3 4 2 iec 320/c14 inlet - for class i version iec 320/c18 inlet - for class ii version amm150 02-dec-08 ac-dc models and ratings notes 1. ripple and noise measured at 20 mhz bandwidth with a 10 f tantalum and 0.1 f ceramic capacitor connected at the measurement point. 2. total regulation includes set accuracy, line and load regulation. 3. for optional barrel jack connector, add suffix b1 to the model number e.g. amm150ps24b1. 4. efficiency given is the average of efficiencies measured with output loads of 25%, 50%, 75% and 100%. models with output voltage of 15 v and higher have 87% minimum. 5. for optional ac cable restraint on the class i version, add suffix a to the model number e.g. amm150ps24a or amm150ps24b1a. ac mains lead must be interpower corporation, part number: 70006020300. optional ac cable restraint is not available on the class ii version. 6. for class ii versions, and c2 to model number, eg. amm150ps24c2 1. dimensions shown in inches (mm). tolerance is 0.02 (0.5) maximum, except output cable length. 2. weight: 2.16 lbs (980 g). 3. output connector is kycon kppx-4p. for mating half use kycon kpjx-4s-s or equivalent. 4. for class i versions shell is connected to ground. for class ii versions shell is capacitively coupled to input. pin function 1 return 2 output+ 3 return 4 output+ notes output power output voltage output current total regulation (2) model number (5,6) 132 w 12 v 11.00 a 5% amm150ps12 144 w 15 v 9.60 a 5% AMM150PS15 150 w 19 v 7.90 a 5% amm150ps19 150 w 24 v 6.25 a 5% amm150ps24 (3) 150 w 27 v 5.56 a 5% amm150ps27 (3) 150 w 48 v 3.13 a 5% amm150ps48 (3) optional barrel jack connector 0.433 (11.0) 0.083 (2.1) 0.413 (10.5) 0.217 (5.5) mechanical details
|
